Airsoft Battery Fitment Guide for Titan Power Batteries
Share
One of the questions we get asked the most through our social media and contact forms is "Will this battery fit my gun?"
Honestly, this is a very hard question to answer. The amount of airsoft devices in our beloved hobby is incredible- a quick search on Evike.com showed 1046 different M4 style rifles alone.
Imagine how fast the models would add up if we included others- AK, G3, HK, MP5, MP7, PDW, SCAR... The list is huge, and it's very difficult to measure every device in existence.
But, with a little bit of your help, we don't have to! In summary:
Our batteries fit in the majority of the devices in the airsoft market. Our 11.1 and 7.4 Nunchuck batteries typically fit inside most crane stocks. Our 11.1 sticks typically fit inside buffer tubes or AK receivers, although length is a major concern as these packs are a bit long for some devices. Our 11.1 and 7.4 bricks fit inside our 3d printed PEQ boxes and LMG mags. Our 7.4 sticks fit inside buffer tubes or crane stocks and some AKs.
It's very important to understand the space you have for your battery, and to read our descriptions for size so that fitment isn't an issue. Measure with a tape measure or calipers, or eyeball it with a ruler, to determine if you think it will fit in your device.
For more detailed size specifications, here's the in depth information:
11.1 Nunchucks-
Size: 19.5mm (0.77in) thick, 132mm (5.2in) long... This battery is typically placed inside crane stocks, please measure your battery space prior to ordering if there is concern on fitment.
11.1 Sticks-
Size: 19.5mm (0.77in) thick, 197mm (7.76in) long... This battery is typically placed inside buffer tubes or AK receivers. Please note that when in buffer tubes, it's common for the front two stock positions to not be able to be used, but the back 3 instead. For AK receivers, please check the width measurement inside your device against the specifications above prior to ordering if there is concern on fitment.
11.1 Bricks-
Size: 55mm (2.17in) thick, 70mm (2.76in) long, and 19mm (0.75in) tall... This battery is typically placed inside PEQ boxes or LMGs. Please note that it will not fit all PEQs or LMGs, measure your battery space prior to ordering if there is concern on fitment. Titan offers our own 3D-printed PEQ box if needed, it's not the prettiest but it functions well!
7.4 Sticks-
Size: 19.5mm (0.77in) thick, 132mm (5.2in) long... This battery is typically placed inside buffer tubes or crane stocks, please measure your battery space prior to ordering if there is concern on fitment.
7.4 Bricks-
Size: 56.5mm (1.44in) thick, 70mm (2.76in) long, and 19mm (0.75in) tall... This battery is typically placed inside PEQ boxes or LMGs. Please note that it will not fit all PEQs or LMGs, measure your battery space prior to ordering if there is concern on fitment. Titan offers our own 3D-printed PEQ box if needed, it's not the prettiest but it functions well!
Â
We hope this information has helped you better understand if our batteries can fit in your device. With Titan Power, airsofters can enjoy the key features of lithium ion from a quality and safe product: No puff, no memory, 2x-5x the capacity on average, no fade, and a warranty better than any other battery in existence.
Thanks for reading!